Proportioning Design of Foamed Concrete Mixed with Recycled Micro-powder of Construction Waste

Journal: Architecture Engineering and Science DOI: 10.32629/aes.v2i3.376

Hongyang Xie1, Jianjun Dong1, Yong Deng1, Yiwen Dai1, Mingwei Deng2

1. School of Civil Engineering and Architecture, Nanchang Aviation University
2. Practical Training Department, Jiangxi Construction Vocational and Technical College

Abstract

This paper presents a new kind of foamed concrete mixed with recycled micro-powder of construction waste which is helpful for saving resources, protecting the environment and achieving a sustainable development. An orthogonal experiment was designed to test the compressive strength of foamed concrete relatng to different factors, and the degree of influence were studied according to test result and range analysis of the factors. Using the efficacy coefficient method, the best mixture ratio was derived when both requirements of a quite light weight and a high strength were satisfied. XRD and SEM tests showed that the increase in compressive strength was due to the refinement of pores within the foamed concrete by the addition of recycled micronized powder.

Keywords

construction waste recycled micronized powder, orthogonal test, foam concrete, efficacy coefficient method, SEM test

Funding

The Science and Technology Research Project of Jiangxi Provincial Education Department(GJJ205301) and Nanchang University of Aeronautics and Astronautics Postgraduate Innovation Special Fund(YC2020-095)

References

[1] Li Qiuyi, Quan Hongzhu, Qin Yuan. Recycled concrete aggregates [M]. Beijing: China Construction Industry Press, 2011.
[2] Kirubajiny Pasupathy , Sayanthan Ramakrishnan, Jay Sanjayan. Inflfluence of recycled concrete aggregate on the foam stability of aerated geopolymer concrete[J]. Construction and Building Materials, 2021, 271.
[3] Zhang Xiao-Ming, Huang Peizeng, Cui Qingyi. Research on the performance of construction waste recycled micronized foam concrete [J]. Concrete and Cement Products, 2020(05): 96-98.
[4] Shi Shiqin. Research on the thermal insulation performance of steel slag foam concrete [D]. Anhui University of Technology, 2016.
[5] Li Yingquan, Zhu Lide, Li Juli, Hu Shikai, Duan Ce, Wang Xiaofan. Design of foam concrete mix ratio [J]. Journal of Xuzhou Engineering College (Natural Science Edition), 2011, 26(02): 1-5+90.
[6] Yang Fanxuan, Shi Minghui, Niu Yangyang, Wang Yao, Jiang Junyi, Zhang Jiaxuan, Yin Guangsheng. Research on foam concrete proportion based on orthogonal test [C]. Proceedings of the 28th National Academic Conference on Structural Engineering (Volume III). 2019.
[7] Yu Junyan. Research on the foam lightweight soil roadbed for Binlai Expressway reconstruction and expansion [D]. Shandong University, 2018.
[8] Gao Yunyan. Orthogonal and regression test design methods [M]. Beijing: Metallurgical Industry Press, 1988.

Copyright © 2021 Hongyang Xie, Jianjun Dong, Yong Deng, Yiwen Dai, Mingwei Deng

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License